User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no vlan pvid
This command sets the VLAN ID per interface to 1.
Format | no vlan pvid |
Mode | Interface Config |
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.
Format | vlan tagging |
Mode | Interface Config |
no vlan tagging |
|
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.
Format | no vlan tagging |
Mode | Interface Config |
Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands are divided into two functional groups:
•Show commands display spanning tree settings, statistics, and other information.
•Configuration Commands configure features and options of the switch. For every configuration command there is a show command that displays the configuration setting.
show spanning-tree
This command displays spanning tree settings for the common and internal spanning tree, when the optional parameter “brief” is not included in the command. The following details are displayed.
Switching Commands |
