User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

bootpdhcprelay maxhopcount

This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the system. The <hops> parameter has a range of 1 to 16.

Default

4

Format

bootpdhcprelay maxhopcount <1-16>

Mode

Global Config

no bootpdhcprelay maxhopcount

This command configures the default maximum allowable relay agent hops for BootP/DHCP Relay on the system.

Format

no bootpdhcprelay maxhopcount

Mode

Global Config

bootpdhcprelay minwaittime

This command configures the minimum wait time in seconds for BootP/DHCP Relay on the system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the request or not. The parameter has a range of 0 to 100 seconds.

Default

0

Format

bootpdhcprelay minwaittime <0-100>

Mode

Global Config

no bootpdhcprelay minwaittime

This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system.

Format

no bootpdhcprelay minwaittime

Mode

Global Config

Routing Commands

9-13

202-10009-01_060204

Page 195
Image 195
NETGEAR 7300 Series user manual Bootpdhcprelay maxhopcount, Bootpdhcprelay minwaittime, No bootpdhcprelay maxhopcount