
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Router Priority | A number representing the OSPF Priority for the specified inter- |
| face. This is a configured value. |
Retransmit Interval | A number representing the OSPF Retransmit Interval for the |
| specified interface. This is a configured value. |
Hello Interval | A number representing the OSPF Hello Interval for the specified |
| interface. This is a configured value. |
Dead Interval | A number representing the OSPF Dead Interval for the specified |
| interface. This is a configured value. |
LSA Ack Interval | A number representing the OSPF LSA Acknowledgement Inter- |
| val for the specified interface. |
Transit Delay Interval | A number representing the OSPF Transit Delay for the specified |
| interface. This is a configured value. |
Authentication Type | The OSPF Authentication Type for the specified interface are: |
| none, simple, and encrypt. This is a configured value. |
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type | Broadcast LANs, such as Ethernet and IEEE 802.5, take the value |
| 'broadcast'. The OSPF Interface Type will be 'broadcast'. |
State | The OSPF Interface States are: down, loopback, waiting, point- |
| |
| the state of the OSPF interface. |
Designated Router | Is the router ID representing the designated router. |
Backup Designated Router Is the router ID representing the backup designated router. Number of Link Events The number of link events.
Metric Cost | Is the cost of the ospf interface. This is a configured value. |
show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables. This command takes no options.
Format | show ip ospf interface brief |
Mode | Privileged EXEC and User EXEC |
Slot/Port Is the unit slot/port identifying each interface.
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface. This is a configured value.
Routing Commands |