User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

snmp-server enable traps multiusers

This command enables Multiple User traps. When the traps are enabled, a Multiple User Trap is sent when a user logs in to the terminal interface (EIA 232 or telnet) and there is an existing terminal interface session.

Default

Enabled

Format

snmp-server enable traps multiusers

Mode

Global Config

no snmp-server enable traps multiusers This command disables Multiple User traps.

Format

no snmp-server enable traps multiusers

Mode

Global Config

snmp-server enable traps stpmode

This command enables the sending of new root traps and topology change notification traps.

Default

Enabled

Format

snmp-server enable traps stpmode

Mode

Global Config

no snmp-server enable traps stpmode

This command disables the sending of new root traps and topology change notification traps.

Format

no snmp-server enable traps stpmode

Mode

Global Config

snmptrap

This command adds an SNMP trap name. The maximum length of name is 16 case-sensitive alphanumeric characters.

Default

The default name for the six undefined community names is

 

Delete.

Format

snmptrap <name> <ipaddr>

 

 

Switching Commands

8-33

202-10009-01_060204

Page 99
Image 99
NETGEAR 7300 Series user manual Snmp-server enable traps multiusers, Snmp-server enable traps stpmode, Snmptrap