NETGEAR 7300 Series Distance rip, Distribute-list out, No distance ospf, No distance rip

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

The range of preference is 0 to 255.

Default	Intra -- 8; Inter -- 10; Type-1 -- 13; Type-2 -- 150.
Format	distance ospf {intra inter type1 type2} <0-255>
Mode	Router OSPF Config
no distance ospf

This command sets the default route preference value of OSPF in the router. The type of OSPF can be intra, inter, type-1, or type-2. Format

Format	no distance	ospf {intra inter type1 type2}
Mode	Router OSPF	Config

distance rip

This command sets the route preference value of RIP in the router. Lower route preference values are preferred when determining the best route.

Default	15
Format	distance rip <0-255>
Mode	Router RIP Config
no distance rip

This command sets the default route preference value of RIP in the router.

Format	no distance rip
Mode	Router RIP Config

distribute-list out

This command is used to specify the access list to filter routes received from the source protocol.

Format	distribute-list <1-199> out {rip bgp static con-
Mode	nected}
	Router OSPF Config

Routing Commands 9-17

202-10009-01_060204