| User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software |
|
|
Format | no bridge |
Mode | Global Config |
Forwarding Database ID Fdbid (Forwarding database ID) indicates which forwarding database's aging timeout is being configured. All is used to con- figure all forwarding database's agetime. In an SVL system, the [fdbid/all] parameter is not used and will be ignored if entered.
mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port- channel (LAG) interfaces. For the standard implementation, the range of <mtusize> is a valid integer between
Default | 1522 |
Format | mtu |
Mode | Interface Config |
no mtu |
|
This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.
Format | no mtu |
Mode | Interface Config |
network javamode
This command specifies whether or not the switch should allow access to the Java applet in the header frame of the Web interface. When access is enabled, the Java applet can be viewed from the Web interface. When access is disabled, the user cannot view the Java applet.
Default | Enabled |
|
Format | network | javamode |
Mode | Privileged EXEC | |
no network javamode
This command disallows access to the Java applet in the header frame of the Web interface. When access is disabled, the user cannot view the Java applet.
Switching Commands |
