Headband 3 wearing style, Tone control adjustment

Received sound volume adjustment

Adjust the volume of received sound according to personal prefer- ence. To adjust the volume:

1.Make a telephone call and ask the person you are calling to assist you.

2.Adjust the volume of the received sound by pressing the + or

– button. This setting is now stored in the headset.

Note: When the volume reaches maximum or minimum, you will hear

a beep in your headset. The product will save the set volume in its memory.

Tone control adjustment

Select the tone (from Treble Lift to Bass Lift) according to personal preference. To select the tone:

1.Make a telephone call and ask the person you are calling to assist you.

2.Press the multifunction button for 6 seconds. A beep will indicate when 6 seconds has passed.

3.Press the volume + or – button to toggle between the 4 sound modes.

4.When the desired sound mode is reached, exit the sound mode adjustment by pressing the multifunction button momentarily.

Positioning of microphone

Adjust the boomarm of your headset so that the microphone is posi- tioned in the direction of your mouth, as close as possible to your mouth.

Muting the microphone

To mute and un-mute the microphone, press the multifunction button momentarily. You are still able to hear your caller, but your voice will not be transmitted to the caller.

Note: When the microphone is muted, you will hear a beep every 15 seconds in your headset and the red mute indicator on the base unit will light.

Wearing styles: headband and earhook

The wearing style of your headset may be changed by attaching a headband (3) or earhook (4).

To remove a wearing style from your headset

1.Remove the earcushion (5+6) from the headset receiver (head- band version only).

2.Hold the headband/earhook with one hand and the headset re- ceiver in the other hand.

3.Gently press the headset receiver’s speaker with your thumb and pull the headband/earhook ring away.

To attach a headband for headband wearing style:

1.Gently press the headband ring to the headset receiver until it clicks. The square knob on the headband ring will match the square hole in the headset receiver.

2.Click the earcushion on to the headset receiver.

To attach an earhook for over-the-ear wearing style:

1.For wearing over your left ear, align the “L” inside the ear hook with the square hole on the headset, and gently press the ear hook onto the headset receiver. For wearing over your right ear, align the “R” inside the earhook with the square hole on the headset, and gently press the ear hook onto the headset receiver.

2.Attach the earhook to the earhook ring’s clutch.

After attaching the earhook, you may now adjust the headset to be worn on your right or left ear, depending on personal preference. See the changing wearing ear section for instructions.

Changing wearing ear