NETGEAR 7300 Series user manual Config lag create name Global Port-channel name

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Table 13-2.	IS CLI Mapping (continued)
Package	7300 Series L3 Switch Command	CLI Command
		Mode	Syntax
		Interface	no snmp trap link- status
		Config
		Global	snmp trap link- status all
		Config
		Global	no snmp trap link- status all
		Config
Switching	config port physicalmode <slot/port	Interface	speed {{100 10} {half-duplex
	all> <100h 100f 10h 10f>	Config	full-duplex} 1000 full-duplex}
		Global	speed all {{100 10} {half-duplex
		Config	full-duplex} 1000 full-duplex}
Switching	config port lacpmode <slot/port/all>	Interface	port lacpmode
	<enable/disable>	Config
		Interface	no port lacpmode
		Config
		Global	port lacpmode all
		Config
		Global	no port lacpmode all
		Config
Switching	config port autoneg <slot/port/all>	Interface	auto-negotiate
	<enable/disable>	Config
		Interface	no auto-negotiate
		Config
		Global	auto-negotiate all
		Config
		Global	no auto-negotiate all
		Config
Switching	config lag create <name>	Global	port-channel <name>
		Config
Switching	config lag addport <logical slot/	Interface	addport <logical slot/port>
	port> <slot/port>	Config
A-36			IS CLI Mapping

202-10009-01_060204