User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

Mode

Global Config

no ip route distance

This command sets the default static route preference value in the router. Lower route preference values are preferred when determining the best route.

Format

no ip route distance

Mode

Global Config

ip routing

This command enables the IP Router Admin Mode for the master switch.

Format

ip routing

Mode

Global Config

no ip routing

 

This command disables the IP Router Admin Mode for the master switch.

Format

no ip routing

Mode

Global Config

redistribute

This command configures OSPF protocol to redistribute routes from the specified source protocol/ routers.

Default value for metric Default value for type Default value for tag Format

Mode

unspecified 2 0

redistribute {rip bgp static connected} [metric <0-16777215>] [metric-type {1 2}] [tag <0- 4294967295>] [subnets]

Router OSPF Config

9-32

Routing Commands

202-10009-01_060204

Page 214
Image 214
NETGEAR 7300 Series user manual Ip routing, Redistribute, No ip route distance, No ip routing