User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
monitor session mode
This command configures the monitor session (port monitoring) mode to enable. The probe and monitored ports must be configured before monitor session (port monitoring) can be enabled. If enabled, the probe port will monitor all traffic received and transmitted on the physical monitored port. It is not necessary to disable port monitoring before modifying the probe and monitored ports.
Default | Disabled |
Format | monitor session mode |
Mode | Global Config |
no monitor session mode |
|
This command sets the monitor session (port monitoring) mode to disable.
Format | no monitor session mode |
Mode | Global Config |
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
Default | Disabled |
Format | port lacpmode |
Mode | Interface Config |
no port lacpmode |
|
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format | no port lacpmode |
Mode | Interface Config |
port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format | port lacpmode | all |
Mode | Global Config |
|
|
|
|
Switching Commands |
|
