NETGEAR 7300 Series Dhcp Server Show Commands, Network, Service dhcp, No network, No service dhcp

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

network

This command is used to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to

255.IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The prefix-length is an integer from 0 to 32.

Default	None
Format	network <networknumber> [mask prefixlength]
Mode	DHCP Pool Config
no network

This command removes the subnet number and mask.

Format	no network
Mode	DHCP Pool Config

service dhcp

This command enables the DHCP server and relay agent features on the router.

Default	Disabled
Format	service dhcp
Mode	Global Config
no service dhcp

This command disables the DHCP server and relay agent features.

Format	no service dhcp
Mode	Global Config

DHCP Server Show Commands

These commands display the DHCP Server address bindings, and statistics.

12-6 DHCP Server Commands

202-10009-01_060204