User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

This command may be issued at any time; if the class is currently referenced by one or more policies or by any other class, this deletion attempt shall fail.

Format

no class-map <classname>

Mode

Global Config

class-map rename

This command changes the name of a DiffServ class. The <classname> is the name of an existing DiffServ class. The <newclassname> parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class.

Note: The class name ‘default’ is reserved and must not be used here.

Default

None

Format

class-map rename <classname> <newclassname>

Mode

Global Config

match any

This command adds to the specified class definition a match condition whereby all packets are considered to belong to the class. The optional [not] parameter has the effect of negating this match condition for the class (i.e., none of the packets are considered to belong to the class).

Default

None

Format

match [not] any

Mode

Class-Map Config

match class-map

This command adds to the specified class definition the set of match conditions defined for another class. The <refclassname> is the name of an existing DiffServ class whose match conditions are being referenced by the specified class definition.

Note: There is no [not] option for this match command.

Default

None

 

Format

match class-map <refclassname>

 

Mode

Class-Map Config

 

 

 

CLI Commands: Differentiated Services

10-5

202-10009-01_060204

Page 247
Image 247
NETGEAR 7300 Series user manual Class-map rename, Match any, Match class-map