User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN). VLAN range is
Format | no vlan |
Mode | VLAN database |
vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority frames received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Default | Admit All |
|
Format | vlan acceptframe {vlanonly all} | |
Mode | Interface | Config |
no vlan acceptframe
This command sets the frame acceptance mode per interface to Admit All. For Admit All mode, untagged frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format | vlan acceptframe {vlanonly all} |
Mode | Interface Config |
vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
Default | Disabled |
Format | vlan ingressfilter |
Mode | Interface Config |
|
|
Switching Commands |
