
| User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software |
|
|
Format | no ip ospf |
Mode | Interface Config |
ip ospf areaid
This command sets the OSPF area to which the specified router interface belongs. The value for <areaid> is an IP address, formatted as a
Format | ip ospf areaid <areaid> |
Mode | Interface Config |
ip ospf authentication
This command sets the OSPF Authentication Type and Key for the specified interface.
The value of <type> is either none, simple or encrypt. The [key] is composed of standard displayable,
Default | The default authentication type is none. |
Default | The default password key is not configured. Unauthenticated |
| interfaces do not need an authentication key. |
Default | The default keyid is not configured. Unauthenticated interfaces |
| do not need an authentication key id. |
Format | ip ospf authentication {none {simple <key>} |
Mode | {encrypt <key> <keyid>}} |
Interface Config | |
no ip ospf authentication |
|
This command sets the default OSPF Authentication Type for the specified interface.
Format | no ip ospf authentication |
Mode | Interface Config |
Routing Commands |