
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or to both TLS1 and SSL3.
Default | SSL3 and TLS1 |
Format | ip http |
Mode | Privileged EXEC |
no ip http secure-protocol
This command is used to remove protocol levels (versions) for secure HTTP.
Format | no ip http | |
Mode | Privileged | EXEC |
ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Default | Disabled |
Format | ip http |
Mode | Privileged EXEC |
no ip http |
|
This command is used to disable the secure socket layer for secure HTTP.
Format | ip http |
Mode | Privileged EXEC |
ip http server
This command enables access to the switch through the Web interface. When access is enabled, the user can login to the switch from the Web interface. When access is disabled, the user cannot login to the switch's Web server.
Disabling the Web interface takes effect immediately. All interfaces are effected.
Switching Commands |