User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
OSPF Area ID | Represents the OSPF Area Id for the specified interface. This is a |
| configured value. |
Router Priority | A number representing the OSPF Priority for the specified inter- |
| face. This is a configured value. |
Hello Interval | A number representing the OSPF Hello Interval for the specified |
| interface. This is a configured value. |
Dead Interval | A number representing the OSPF Dead Interval for the specified |
| interface. This is a configured value. |
Retransmit Interval | A number representing the OSPF Retransmit Interval for the |
| specified interface. This is a configured value. |
Transit Delay Interval | A number representing the OSPF Transit Delay for the specified |
| interface. This is a configured value. |
LSA Ack Interval | A number representing the OSPF LSA Acknowledgement Inter- |
| val for the specified interface. |
show ip ospf interface stats
This command displays the statistics for a specific interface. The information below will only be displayed if OSPF is enabled.
Format | show ip ospf interface stats <slot/port> |
Mode | Privileged EXEC and User EXEC |
OSPF Area ID | The area id of this OSPF interface. |
Spf Runs | The number of times that the |
| culated using this area's |
Area Border Router Count The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF pass.
AS Border Router Count The total number of Autonomous System border routers reach- able within this area.
Area LSA Count | The total number of |
| state database, excluding AS External LSAs. |
IP Address | The IP address associated with this OSPF interface. |
OSPF Interface Events The number of times the specified OSPF interface has changed | |
| its state, or an error has occurred. |
Virtual Events | The number of state changes or errors that occurred on this virtual |
| link. |
|
|
Routing Commands | |
