Quick Start
1
3
When assembling your Steam Pocket® Mop there may be a little water in or around the water tank. This is because we test all our Steam Pocket® Mops 100% before you buy them, so you get
aquality Shark® Steam Pocket® Mop.
2
4
ASSEMBLE
1Insert the mop handle into the pump actuator (the tube that leads to the tank). Push the mop handle and pump actuator together in until you hear it click into place.
2Select a cleaning pad. Fit one side of the pocket onto the head first, then using the lavender loop, pull the pocket over the head. Attach the quick fasteners on the top of the pocket to secure in place.
3Snap the mop head into the base to secure it. Press the release button to exchange mop heads.
FILL
4Lay the mop on the floor or on a counter top and remove the water tank cap by turning counter clockwise. Fill the water tank using the filling flask. Do not overfill the water tank. Replace the water cap and tighten.
IMPORTANT: Make sure your floors are sealed. Before using the Steam Pocket® Mop consult page 4 for more information.
TOLL FREE:
S3501_N_S3501BB_11_IB_ENG_101119.indd 4 |