Shark S3501 N, S3501BB manual Using Your Steam Pocket Mop

Using Your Steam Pocket® Mop

IMPORTANT: Make sure you don’t use the mop without attaching

amicro-fiber pocket and adding water to the tank first. When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming. Just pump the handle a few times in a downward motion to prime the pump and it should be ready.

1

NOTE: Make sure the floors are swept or vacuumed before using the

Steam Pocket® Mop.

1Pull and twist the quick release cord holder to unwrap the power cord completely. A great time saver!

Plug into a 120-volt electrical outlet The power “On” light will turn blue, it takes approximately 30 seconds for the mop to heat up and the steam to be ready.

2

2Pump the handle a few times in a downward motion. This pumping action will release steam as you mop and allows you to customize the amount of steam you want. Begin mopping with a forward and backward motion. The natural motion of mopping will produce steam.

6

TOLL FREE: 1-800-798-7398

S3501_N_S3501BB_11_IB_ENG_101119.indd 6 10-11-22 2:28 PM