30
KEYSTONE buttonReduce the upper width with
Point ! button.
Reduce the lower width
with Point button.
Reduce the left part with
Point button.
Reduce the right part with
Point button.
s4HEWHITEARROWSINDICATETHATTHEREISNOCORRECTION
s!REDARROWINDICATESTHEDIRECTIONOFCORRECTION
s!NARROWDISAPPEARSATTHEMAXIMUMCORRECTION
s)FYOUPRESSTHE+%934/.%BUTTONONTHEREMOTE
control again while the Keystone dialog box is being
displayed, the keystone adjustment will be canceled.
s4HEADJUSTABLERANGECANBELIMITEDDEPENDINGONTHE
input signal.
sh+EYSTONEvDISAPPEARSAFTERSECONDS
Press the P-TIMER button on the remote control. The
Timer display “00 : 00” appears on the screen and starts
to count time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.
P-TIMER buttonP-Timer display
Remote Control
P-TIMER
button
SHUTTER
button
Note:
s3EETHE PREVIOUS PAGE FOR THE DESCRIPTION OF
OTHERBUTTONS
IMAGE ADJ.
button
Press the KEYSTONE button on the remote control. The
“Keystone” appears on the screen.
Use the Point ! buttons to correct keystone
distortion. The keystone adjustment can be stored
(pp.40, 44).
Basic Operation
KEYSTONE
button
IMAGE SEL.
button
Press the IMAGE ADJ. button on the remote control to
adjust a image level of the screen.
For more detail, see pp.45-47.
IMAGE ADJ. buttonIMAGE SEL. buttonPress the IMAGE SEL. button on the remote control to
select a desired image level of the screen.
For more detail, see pp.38, 42.
SHUTTER buttonSee page 27 for details.
FILTER buttonPress and hold the FILTER button for more than five
seconds to replace the filter mechanically. See page 51
for details.
FILTER
button
Note:
s4HEFILTERCANNOTBEREWOUND
s7HENTHEFILTER IS REPLACED THE TOTAL ACCUMULATED TIME OF
THEFILTERUSEISAUTOMATICALLYSETTO
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)