Christie Digital Systems 020-000141-01 Lamp mode, Lamp control, Filter control, Fan control

Setting

Lamp mode

This Projector is equipped with 2 Projection Lamps and the number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintains the life of Projection Lamps.

To change over Lamp Mode

Set "2 lamps mode" or "1 lamp mode" by pressing the Point  buttons. When the Lamp Mode is switched from "2 lamps mode" to "1 lamp mode", the image becomes a little darker. When the Lamp Mode is switched from "1 lamp mode" to "2 lamps mode", the image becomes brighter gradually.

Lamp control

This function allows you to change the brightness of the screen.

Auto . . . . . Brightness according to the input signal.

Normal . . . Normal brightness.

Eco . . . . . . Lower brightness. Lower brightness reduces the lamp power consumption and extends the lamp life.

Filter control

You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at “YES” and the electrically operated filter starts to scroll.

You can also replace the filter by using the remote control (p. 30).

Fan control

Choose the running speed of cooling fans from the following

options.
Normal	Normal speed.
Max	Faster than the normal speed.

Note:

ssHEN NEITHERT OF THEH TWOO LAMPSM IS LIGHTED THE PROJECTOREWILL SHUTDOWN AUTOMATICALLY

ssHEN EITHER OF THEHTWOOLAMPSMDOES NOTOLIGHTGUPP THEH ,!-0  2%0,!#% INDICATORC BLINKS ORANGE ANDNTHE PROJECTORPWILL LIGHT THE OTHER AUTOMATICALLY

ss!FTERE CHANGINGG THEH ,AMP -ODED IT CANNOT BE SWITCHEDEAGAINAFOR  SECONDS

Note:

ss&ILTER REPLACEMENT ICONAANDEh0LEASEEWAITvv

MESSAGESAPPEAR ONATHEPSCREEN WHENNTHETFILTER ISC BEINGISCROLLED

s4HE FILTERICANNOT BE REWOUND

ssHEN THEHFILTER IS REPLACEDATHEHTOTAL ACCUMULATEDU TIME OFETHEOFILTER USE ISFAUTOMATICALLYUSETETO 

LX1000 User Manual	51
020-000141-01 Rev. 1 (05-2009)