Christie Digital Systems 020-000141-01 user manual Then check the matters below

Maintenance and Care

Warning Indicators

The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the LAMP indicator to take proper maintenance.

The projector is shut down and the WARNING TEMP. indicator is blinking red.

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The LAMP indicator turns red brighter and the WARNING TEMP indicator blinks while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the ON/ STAND-BY button.

Note:

ss4HE !2.).' 4%-0INDICATORICONTINUESRTO BLINK EVEN AFTERETHE TEMPERATURERINSIDE THE PROJECTOR RETURNS TOSNORMAL HEN THE PROJECTORC IS TURNEDNON AGAINNTHEA !2.).' 4%-0INDICATORISTOPSTBLINKING

Then check the matters below:

–Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

–Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

–Is the filter clean? Replace the filter with a new one.

Indicators

WARNING TEMP. blinking red

The projector is shut down; and the LAMP indicator is lighting and other indicators are blinking.

When the projector detects an abnormal condition, it will be automatically shut down to protect the inside of the projector and the LAMP indicator lights on and other indicators blink. In this case, unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the projector cannot be turned on and these indicators are still lighting and blinking, unplug the AC power cord and contact the service station.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.

Indicators

LAMP indicator lights on and other indicators blink.

LX1000 User Manual	65
020-000141-01 Rev. 1 (05-2009)