Christie Digital Systems 020-000141-01 user manual Terminals of Projector, Replacement of Terminal

Installation

Terminals of Projector

The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the projector.

2 TERMINAL SLOTS (Factory set)
INPUT/OUTPUT
TERMINALS
DVI / D-sub 15 Terminal	5-BNC / VideoTerminal

Replacement of Terminal

Note:

s )Ns THE REPLACEMENT OFLINTERFACECBOARD TURNROFFFTHET PROJECTORPRESSRTHES-AIN /N/FFF3WITCHHTO /FFFANDA UNPLUG THE !##POWER CORDCFROM THE !##OUTLET

1Remove 2 Screws from an interface board.

2Pull out the interface board.

3Replace the interface board. Insert a new interface board along Guide to fit Plug into Socket.

4Tighten screws to secure the interface board.

NOTES ON ORDERING OR USING OPTIONAL INTERFACE BOARD

When ordering or using Optional Interface Board, contact your sales dealer. When contacting the sales dealer, tell the Option Control Number (Op.cont.No.) in the menu that is located on the bottom of the information menu.

(See page 28)

Screws

Guide Socket

Plug Figure shows Dual-SDI terminal.

LX1000 User Manual	19
020-000141-01 Rev. 1 (05-2009)