Christie Digital Systems 020-000141-01 Projector is detecting abnormal condition, Lamp Replace 1

Appendix

The projector is detecting abnormal condition.

Indicators

Projector Condition

LAMP

READY

WARNING

WARNING

SHUTTER

LAMP 1/2

red

green

TEMP.

FILTER

blue

REP.

red

orange

orange

=

=

=

The temperature inside the projector is elevated

close to the abnormally high level.

The temperature inside the projector is abnormally

high. The projector cannot be turned on. When

=

=

=

the projector is cooled down enough and the

temperature returns to normal, the READY indicator

lights green and the projector can be turned on. (The

WARNING TEMP. indicator keeps blinking.)

The projector has been cooled down enough and

=

=

=

the temperature returns to normal. When turning on

the projector, the WARNING TEMP. indicator stops

blinking. Check and replace the filter.

The lamp cannot light up. (The projector is preparing

=

=

for stand-by or the projection lamp is being cooled

down. The projector cannot be turned on until

cooling is completed.)

The lamp cannot light up. (The lamp has been

=

=

cooled down enough and the projector is in stand-

by mode and ready to be turned on with the ON/

STAND-BY button.)

=

=

=

When either of the 2 lamps is out, the projector

operates with 1 lamp.

The lamp has been used overtime. Replace the

=

=

=

=

=

lamp immediately and then reset the lamp counter.

The indicator will be turned off after resetting the

counter.

WARNING FILTER

When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.59).

LAMP REPLACE 1 and 2

When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 55, 61, and 62.

LX1000 User Manual	73
020-000141-01 Rev. 1 (05-2009)