Computer Input
Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
1Press the MENU button to display the
2Use the Point ! buttons to move the red frame pointer to the desired function and then press the SELECT button.
Normal
Provide the image at the normal computer aspect ratio of 4:3.
True
Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point !
buttons to pan the image. When adjusted, the arrows will
turn red. When reached to the correction limits, the arrows will disappear.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.
Full screen
Provide the full screen image.
SCREEN MENU
Screen Menu icon
Move the red frame pointer to the desired function and press the SELECT button.
Note:
ss4RUE E&ULLLSCREEN CANDE$IGITAL ZOOMO n CANNOT BE SELECTEDLWHEN NOESIGNAL ISEDETECTED INSTHEG 0# 3YSTEM
ss4HEE PROJECTORE CANNOTN DISPLAYY ANDN RESOLUTION HIGHER THAN X )F YOURU COMPUTERS SCREEN RESOLUTION IS HIGHER THAN X
LOWER THEH RESOLUTION BEFORER CONNECTING THE PROJECTOR
ss4HE IMAGE DATAAOTHERTTHAN 8'!!X IS MODIFIED TOIFITDTHETSCREEN SIZEEIN INITIAL MODE ss4HE PANNING FUNCTIONGMAYYNOTNOPERATEOPROPERLY IF THE STORED
USEDEP
Custom
Adjust the screen scale and position manually with this function.
Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears.
Scale H/V | Adjust the Horizontal/Vertical screen scale. |
H&V | When set to “On,” the aspect ratio is |
| fixed. The “Scale V” appears dimmed and |
| becomes unavailable. Adjust “Scale H,” |
| then the screen scale is automatically |
| modified based on the aspect ratio. |
Position H/V | Adjust the Horizontal/Vertical screen |
| position. |
Common | Save the adjusted scale to all the inputs. |
| Press the SELECT button at Common to |
| display a confirmation box. To save the |
| scale, press the SELECT button at “Yes.” |
| When Custom is selected, the saved scale |
| is used. |
Reset | Reset the all adjusted values. Press |
| the SELECT button at Reset to display |
| a confirmation box. To reset, press the |
| SELECT button at “Yes.” |
Press the SELECT button at Common or
Reset, to display a confirmation box.
Note:
ssHEN NONSIGNAL ISSDETECTED Lh.ORMALv ISASETv
AUTOMATICALLYTANDCTHEL!SPECTEDIALOG BOXXDISAPPEARS
ss4HE ADJUSTABLE RANGE FOR 3CALE (6 AND 0OSITIONT(6O
IS LIMITED DEPENDING ONDTHEPINPUTDSIGNAL
LX1000 User Manual | 39 |
|
