Christie Digital Systems 020-000141-01 user manual Turning Off the Projector

Basic Operation

Turning Off the Projector

1Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen.

2Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate. You cannot turn on the projector during this cooling down period.

3When the projector has cooled down enough, the READY indicator lights green and then you can turn on the projector. To turn off the MAIN ON/OFF Switch, wait until the projector is completely cooled down.

“Power off?” disappears after 4 seconds.

4Unplug the AC power cord from the AC outlet.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

COOLING FANS ARE RUNNING OR BEFORE THE

READY INDICATOR LIGHTS GREEN AGAIN.

OTHERWISE IT WILL RESULT IN SHORTENING OF

THE LAMP LIFE.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY

WITHOUT REST. CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE.

Note:

sHEN THE /NTSTARTRFUNCTION ISCSETITO h/NvvTHETPROJECTORR

WILL BELTURNEDNON AUTOMATICALLY BY CONNECTINGETHET!# POWER CORD TODAN !##OUTLET P 

s4HE RUNNING SPEED OFSCOOLINGDFANSNIS CHANGED ACCORDING TOC THEHTEMPERATURERINSIDE THE PROJECTOR

s$O NOT PUT THE PROJECTOR INEA CASE BEFORERTHE PROJECTORPIS COOLED ENOUGH

s)F THE !2.).' 4%-0INDICATORIBLINKS RED SEELh ARNING )NDICATORSvAON PAGES

s4HE PROJECTOR CANNOTTBE TURNEDNON DURINGNTHEDCOOLINGN PERIOD WITHDTHEW2%!$99INDICATORITURNEDNOFF 9OU CAN TURNRIT ON AGAIN AFTERETHE 2%!$99INDICATORIBECOMESOGREENBAGAIN

24	LX1000 User Manual
	020-000141-01 Rev. 1 (05-2009)