Christie Digital Systems 020-000141-01 user manual Shutter, Protection, Management, Lamp counter

Setting

Shutter

Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.

Protection

Prohibits the shutter operation from the remote control and the projector's side control.

Remote control	Selecting "On" prohibits the shutter
	operation from the remote control.
Projector . . .	Selecting "On" prohibits the shutter
	operation from the side control.

It is possible to prohibit the shutter operation from both of

the remote control and the side control.

Management

The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the READY indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off.

Lamp counter

This function is used to reset the lamp counter.

When the lamp life reaches a recommended lamp replacement time, the time shown in the dialog box turns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching.

When replacing the projection lamp, reset the lamp counter. See “Resetting the Lamp Counter” on page 62.

Note:

s4HE ,AMP,REPLACEMENTEICON WILLENOTEAPPEAR WHENOTHE

$ISPLAYYFUNCTION ISTSETOTO h/FFvvP OR DURING h&REEZEv P 

Note:

ss4HE &ACTORYYDEFAULT VALUE IS SETETO  MINUTESUFOR THEHCOUNTCDOWN TIME

ss4HE 3HUTTERE -ANAGEMENT FUNCTION CANNOT BE HALTED

This icon appears on the screen when the end of lamp life is approaching.

Note:

ss4HISIICON ALSOOAPPEARSLAT TURNING ONNAND SELECTINGN INPUTPSOURCE

LX1000 User Manual	55
020-000141-01 Rev. 1 (05-2009)