Christie Digital Systems 020-000141-01 user manual Appears on the screen and the Warning Filter

Appendix

The projector is detecting abnormal condition.

		Indicators				Projector Condition
LAMP	READY	WARNING WARNING		SHUTTER	LAMP 1/2
red	green	TEMP.	FILTER	blue	REP.
		red	orange		orange

If the Filter counter reached a time set in the timer

== setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig.

	Fig.2		Filter replacement icon						3 appears on the screen and the WARNING FILTER
									indicator lights up. Replace the filter cartridge as
									soon as possible.
									If the filter is clogged and no scroll is left in the filter
		Fig.3							cartridge, a Filter cartridge replacement icon (Fig.4)
									appears on the screen and the WARNING FILTER
									indicator lights up. Replace the filter cartridge as
									soon as possible.
	Fig.4		Filter cartridge replacement icon						Note:
									s&IG&IG AND &IG ICONIWILL NOT APPEARLWHEN
									THEH$ISPLAYYFUNCTION ISTSETOTO h/FFvvP OR DURING
									h&REEZEvvP 
							=	=	The projector detects an abnormal condition during
									filter scroll.
							=	=	The projector is being cooled down after detecting
									an abnormal condition during filter scroll.
									The projector has been cooled down enough and is
							=	=	in the stand-by mode after detecting an abnormal
									condition during filter scroll.
									The filter cartridge is not installed in the projector.
									Check the filter compartment to see if the filter
									cartridge is installed in the projector. When the filter
									cartridge is installed and the indicators continue to
									light and blink, read the column below.
									The projector detects an abnormal condition and
									cannot be turned on. Unplug the AC power cord and
									plug it again to turn on the projector. If the projector
									is turned off again, unplug the AC power cord and
									contact the dealer or the service center. Do not
									leave the projector on. It may cause an electric
									shock or a fire hazard.
=				=	=	=		=	The shutter is out of control.
						=		=	The shutter is out of control. (The projector is in the
									cooling mode.)
									The shutter is out of control. (The projector is in the
						=		=	stand-by mode.) In that case, contact the service
									station immediately.
74									LX1000 User Manual
									020-000141-01 Rev. 1 (05-2009)