Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.
Remote Control
Direct Operation
The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control or the AUTO PC ADJ. button on the side control.
AUTO PC button
Side Control
Menu Operation
Auto PC adj.
1Press the MENU button to display the
Use the Point ! buttons to move the red frame pointer
2 to the AUTO PC adj. icon and then press the SELECT button twice.
To store the adjusted parameters.
The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC ADJUSTMENT on pages
AUTO PC ADJ. button
PC ADJUST MENU
PC Adjust Menu icon
Move the red frame pointer to the Auto PC adj. and press the SELECT button twice.
“Please wait...” appears while the Auto PC adjustment is in process.
Note:
s&INEI SYNC N4OTAL DOTS T (ORIZONTAL ANDN6ERTICALI POSITION OF CERTAINI COMPUTERSU CANNOT BE FULLYL ADJUSTED WITH THEH!UTO 0# !DJUSTMENTT FUNCTIONT HEN THEH IMAGEA IS NOTO PROVIDED PROPERLY WITH THIS OPERATION MANUAL ADJUSTMENTST ARE REQUIREDIPP
s!UTOT 0# !DJUSTMENTT CANNOT BE OPERATED IN $IGITAL 3IGNAL )NPUTPON THE $6) TERMINALRANDIhP vvhP vvhI vvhI vv hP vvhI vvOR hIvIS SELECTED ON THEH0#
s$EPENDINGN ON THEH CONDITIONI OF SIGNALSN ANDN THEH TYPEP AND LENGTH OFTCABLES FTHECSIGNALSEMAYYNOTNBE PROPERLY VIEWED
LX1000 User Manual | 35 |
|
