Outdoor Natural Gas Barbecue Grill Model No. GBC956W1NG-C
Troubleshooting
Problem | Possible Cause | Prevention/Cure |
Burner will not light using ignitor | Battery needs to be changed. | Replace the AA battery. (Follow assembly step for inserting |
|
| battery. |
|
|
|
| Wires or electrode covered with cooking residue. | Clean wire and/or electrode with rubbing alcohol. |
|
|
|
| Electrode and burners are wet. | Wipe dry with cloth. |
|
|
|
| Electrode cracked or broken - sparks at crack. | Replace electrode. |
|
|
|
| Wire loose or disconnected. | Reconnect wire or replace electrode/wire assembly. |
|
|
|
| Wire is shorting (sparking) between ignitor and electrode. | Replace ignitor wire/electrode assembly. |
|
|
|
| Bad ignitor. | Replace ignitor. |
|
|
|
Burner will not light with match | Obstruction of gas flow. | Clear burner tubes. Check for bent or kinked hose. |
|
|
|
| Disengagement of burner to valve. | Reengage burner and valve. |
|
|
|
| Spider webs or insect nest in venturi. | Clean venturi. |
|
|
|
| Burner ports clogged or blocked. | Clean burner ports. |
|
|
|
Irregular flame pattern, flame does not run the full length | Burner ports are clogged or blocked. | Clean burner ports. |
of burner. |
|
|
|
|
|
Flame is yellow or orange. | New burner may have residual manufacturing oils. | Burn grill for 15 minutes with the lid closed |
|
|
|
| Spider webs or insect nest in venturi | Clean venturi. |
|
|
|
| Food residue, grease or seasoning salt on burner. | Clean burner. |
|
|
|
| Poor alignment of valve to burner venturi. | Assure burner venturi is properly engaged with valve. |
|
|
|
Flame blow out | High or gusting winds. | Do not use grill in high winds. |
|
|
|
| Grease buildup. | Clean grill. |
|
|
|
| Excess fat in meat. | Trim fat from meat before grilling. |
|
|
|
| Excessive cooking temperature. | Adjust (lower) temperature accordingly. |
|
|
|
Persistent grease fire. | Grease trapped by food buildup around burner system. | Turn control knobs to “OFF”. Turn natural gas line valve to |
|
| “CLOSED”. Leave lid in closed position and let fire burn out. |
|
| After grill cools, remove and clean all parts. |
|
|
|
Flashback (fire in burner tube(s)). | Burner and/or burner tubes are blocked. | Clean burner and/or burner tubes. |
|
|
|
Inside of lid is peeling (like paint peeling). | The lid is stainless steel, not painted. | Baked on grease buildup has turned to carbon and is flaking off. |
|
| Clean thoroughly. |
|
|
|
For more assistance please visit us online at www.bluerhino.com or call 1.800.762.1142.
