Smeg SC45M manual When the oven is working…, Pizza function, Delayed Start Time Automatic cooking

Models: SC45M

1 30
Download 30 pages 27.41 Kb
Page 13
Image 13
7.4.6Pizza function

GB-IE

Instructions for the User

The defrosting time will be calculated based on the food’s type and weight and the microwaves power will be automatically varied to achieve the best thawing results.

The following table shows the defrosting by weight function programmes, indicating weight intervals, and defrosting and standing times (in order to ensure the food is of a uniform temperature).

 

PROGRAMME

 

 

 

FOOD

 

 

 

WEIGHT (G)

 

 

 

TIME (MIN)

 

 

 

STANDING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIME (MIN)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PR 01

 

 

MEAT

 

 

100 – 2000

 

 

2 – 43

 

 

20 – 30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PR 02

 

 

POULTRY

 

 

100 – 2500

 

 

2 – 58

 

 

20 – 30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PR 03

 

 

FISH

 

 

100 – 2000

 

 

2 – 40

 

 

20 – 30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PR 04

 

 

FRUIT

 

 

100 – 500

 

 

2 – 13

 

 

10 – 20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PR 05

 

 

BREAD

 

 

100 – 800

 

 

2 – 19

 

 

10 – 20

7.4.6Pizza function 7.4.7Delayed Start Time (Automatic cooking)

After selecting this function, the weight light 7.5When the oven is working… starts to blink.

Turn PT1 to the right or left to change the preset Pizza weight.

Press PT2 to start the cooking process.

7.4.7Delayed Start Time (Automatic cooking)

When PT1 is pressed to define a delayed start time the corresponding

light 7.5.1Interrupting a cooking cycle starts to blink, DSP1 shows the current time and DSP 2 shows “Auto”.

Turn PT1 to the right or left to change the delayed start time. Press PT2 to validate the delayed start time.

The oven enters in an idle state waiting for the defined start time. DSP3 shows the selected function and DSP1 and DSP2 show all the defined parameters for the function continuously alternating.

If you wish to start the function before the selected time, just press PT2. If you wish to cancel the programming, press PT2 for 3 seconds.

7.5When the oven is working…

7.5.1Interrupting a cooking cycle

You can stop the cooking process at any time by pressing the Start/Stop key once or by opening the oven door. In both cases:

￿Microwave emission is stopped immediately.

￿The grill is de-activated but is still very hot. Danger of burning!

￿The timer stops and the display shows the remaining amount of

operating time.

If you wish, at this time you can:

￿Turn or stir the food to ensure it will be evenly cooked.

￿Modify the process parameters.

￿Cancel the process by pressing PT2 for 3 seconds. To restart the process, close the door and press PT2.

7.5.2Modifying parameters

The operating parameters (time, weight, power, etc.) can only be modified when the cooking process has been interrupted. Proceed as follows:

￿Turn PT2 to the right or left to change the function.

14

Page 13
Image 13
Smeg SC45M When the oven is working…, Pizza function, Delayed Start Time Automatic cooking, Interrupting a cooking cycle