Controlling Other
Controlling an RI Dock
By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod in the Dock with the following buttons.
For some RI docks, the “ON/STANDBY” button may not work with a remote control code 82990 (without u). In this case, make an uconnection and enter a remote control code 82351 (with u).
For details on entering a remote control code, see page 78.
When Using an RI Dock:
•Connect the RI Dock to the TV/TAPE IN, VCR/DVR IN, or CBL/SAT IN L/R jacks.
•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/DOCK”.
•Set the AV receiver’s Input Display to “DOCK” (see page 43).
•See to the Dock’s instruction manual for more information.
Press the appropriate
REMOTE MODE button first
a | h |
| i |
| j |
| k |
b | l |
c | m |
| |
| n |
d | o |
e | p |
f | q |
| r |
g
s
aON/STANDBY button
Turns the iPod on or off.
Notes:
•This button does not turn the Onkyo
•Your iPod may not respond the first time you press this but- ton, in which case you should press it again. This is because the remote controller transmits the On and Standby com- mands alternately, so if your iPod is already on, it will remain on when the remote controller transmits an On com- mand. Similarly, if your iPod is already off, it will remain off when the remote controller transmits an Off command.
bTOP MENU button
Works as a Mode button when used with a
cArrow [q]/[w] and ENTER buttons
Used to navigate menus and select items.
dPrevious [7] button
Restarts the current song. Press it twice to select the previous song.
eRewind [5] button
Press and hold to rewind.
fPause [3] button
Pauses playback.
gREPEAT button
Used with the repeat function.
hDISPLAY button
Turns on the backlight for 30 seconds.
iMUTING button (45)
Mutes or unmutes the AV receiver.
jALBUM +/– button
Selects the next or previous album.
kVOL [q]/[w] button (44)
Adjusts the volume of the AV receiver.
lMENU button
Exits the menu.
mPLAYLIST [e]/[r] buttons
Selects the previous or next playlist on the iPod.
nPlay [1] button
Starts playback. If the component is off, it will turn on automatically.
oNext [6] button
Selects the next song.
pFast Forward [4] button
Press and hold to fast forward.
qStop [2] button
Stops playback and displays a menu.
rPLAY MODE button
Selects play modes on components with selectable play modes.
Works as a Resume button when used with a
sRANDOM button
Used with the shuffle function.
Note:
With some components, certain buttons may not work as expected, and some may not work at all.
83
