Listening to the Radio
AM/FM Frequency Step Setup
RECEIVER
qwer
ENTER
SETUP
For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 | Use the Up and Down [q]/[w] |
| buttons to select “8.Hardware”, |
and then press [ENTER].
3 | Use the Up and Down [q]/[w] | ||
| buttons to select “FM/AM”. | ||
|
|
|
|
|
|
|
|
|
|
|
|
4 Use the Left and Right [e]/[r]
buttons to select: 200k/10k:
Select if 200k/10k steps are used in your area.
50k/9k: Select if 50k/9k steps are used in your area.
5 | Press the [SETUP] button. |
| |
| Setup closes. |
Note:
This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
48