Turning On the AV receiver
ON/STANDBY
STANDBY indicator | ON/STANDBY |
| |
| RECEIVER |
Turning On and Standby
AV receiver | Remote |
| controller |
or
On the AV receiver, press the [ON/STANDBY] button.
On the remote controller, press the [RECEIVER] button, followed by the [ON/STANDBY] button.
The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller’s [ON/STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises the next time you turn on the AV receiver, turn down the volume before you turn it off.
Up and Running in a Few Easy Steps
To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once.
■ Do the 2EQ Room Correction and Speaker
See “Audyssey 2EQ™ Room Correction and Speaker Setup” on page 39.
■Did you connect a component to component video input or digital audio input?
If you did, see “Component Video Input Setup” on page 42, or “Digital Input Setup” on page 42 respectively.
■Did you connect an Onkyo MD recorder or CD recorder?
If you did, see “Changing the Input Display” on page 43.
Y
CBPB | COAXIAL |
CRPR OPTICAL
OUT IN
TV/TAPEMD recorder, CD recorder,
RI Dock
38