Mitsubishi Electronics AJ65SBT-64AD user manual General Specification

3 SPECIFICATION MELSEC-A

3 SPECIFICATION

This chapter provides the specifications of the AJ65SBT-64AD.

3.1 General Specification

Table 3.1 indicates the general specifications of the AJ65SBT-64AD.

	Table 3.1 General specification
Item			Specification
Usage ambient temperature			0 to 55°C
Storage ambient temperature			-20 to 75°C
Usage ambient humidity		10 to 90%RH, no condensation
Storage ambient humidity		10 to 90%RH, no condensation
			When there is intermittent vibration
		Frequency	Acceleration	Amplitude	Sweep count
		10 to 57Hz	—	0.075mm
				(0.0030inch)
Vibration durability	Conforming to JIS B	57 to 150Hz	9.8m/s2	—
	3501, IEC 1131-2	When there is continuous vibration			10 times in each direction
		Frequency	Acceleration	Amplitude	X, Y, Z (80 minutes)
		10 to 57Hz	—	0.035mm
				(0.0013inch)
		57 to 150Hz	4.9m/s2	—
Shock durability	Conforming	to JIS B 3501, IEC1131-2 (147m/s2, 3 times each in 3 directions)
Usage environment			No corrosive gas
Usage height		Less than 2000 m (less than 6562 ft.)
Installation area			Within the control board
Over-voltage category *1			Less than II
Pollution level *2			Less than 2

*1 Indicates the location where the device is connected from the public cable network to the device structure wiring area.

Category II applies to the devices to which the power is supplied from a fixed equipment. Surge withstand voltage for devices with up to 300V of rated voltage is 2500V.

*2 This is an index which indicates the degree of conductive object generation in the environment Pollution level 2 is when only non-conductive pollution occurs.

A temporary conductivity caused by condensation must be expected occasionally.

3

3 - 1