Mitsubishi Electronics AJ65SBT-64AD user manual Melsec-A

APPENDIX

MELSEC-A

(2)Precautions for replacing the conventional product (AJ65BT-64AD) with the AJ65SBT-64AD

In the existing system using the conventional product (AJ65BT-64AD), the following instructions must be noted when changing the AJ65BT-64AD for the AJ65SBT-64AD.

(a)Since the AJ65SBT-64AD occupies one station (the AJ65BT-64AD occupies two stations), the station information setting in the network parameters must be changed.

(b)As the remote I/O signals and remote register settings are different between the two models, the program of the conventional model cannot be utilized.

(c)Because of the differences in shape and layout between the terminal blocks, you cannot use the terminal block of the conventional module as it is.

(d)The offset/gain setting method differs. For details, refer to Section 4.4.

(e)The ways to set the station number and transmission speed setting switches are different. For details, refer to Section 4.3.

Appendix - 2