4 SETUP AND PREPARATION BEFORE OPERATION |
| 4- 1 to 4- 10 | ||
|
|
|
|
|
4.1 | 4- | 1 | ||
4.2 | Precautions When Handling | 4- 1 | ||
4.3 | Name of Each Part | 4- 3 | ||
4.4 | Offset/Gain Setting | 4- | 5 | |
4.5 | Station Number Setting | 4- | 7 | |
4.6 | Facing Direction of the Module Installation | 4- | 7 | |
4.7 | Data Link Cable Wiring | 4- | 8 | |
4.7.1 Instructions for handling the | 4- | 8 | ||
4.7.2 Connection of the | 4- | 8 | ||
4.8 | Wiring | 4- | 8 | |
4.8.1 Wiring precautions | 4- | 8 | ||
4.8.2 Module connection example | 4- 9 | |||
4.9 | Maintenance and Inspection | 4- 9 | ||
|
|
| ||
5 PROGRAMMING |
| 5- 1 to 5- 18 | ||
5.1 | Programming Procedure | 5- 1 | ||
5.2 | Program Examples | 5- 2 | ||
5.2.1 Program examples for use of the ACPU/QCPU (A mode) (FROM/TO instructions) | ...................... 5- 2 | |||
5.2.2 Program examples for use of the ACPU/QCPU (A mode) (dedicated instructions) | 5- 7 | |||
5.2.3 Program examples for use of the QnACPU | 5- 12 | |||
5.2.4 Program examples for use of the QCPU (Q mode) | 5- 15 | |||
|
|
| ||
6 TROUBLESHOOTING |
| 6- 1 to 6- 6 | ||
6.1 | Using the Remote Input Signals to Check Errors | 6- 1 | ||
6.2 | Using the LED Indications to Check Errors | 6- | 2 | |
6.3 | When the digital output value cannot be read | 6- | 4 | |
6.4 | Troubleshooting for the Case where the "ERR." LED of the Master Station Flickers | 6- | 5 | |
|
| |||
APPENDIX | Appendix- 1 to Appendix- 4 | |||
Appendix1 Comparison between This Product and Conventional Product | Appendix- 1 | |||
Appendix2 External dimension diagram | Appendix- 3 |
A - 6