3Com 10014299 manual Displaying Debugging AAA, AAA and Radius, Examples, Accessing User

542 CHAPTER 38: CONFIGURING AAA AND RADIUS PROTOCOL

Configure the time interval at which the	radius timer
real-time accounting packet is sent to	realtime-accounting-scheme minutes
RADIUS server
Restore default value of the time interval	undo radius timer
at which the real-time accounting packet	realtime-accounting
is sent

By default, the real-time accounting packet is sent to the RADIUS server at an interval of 0 minutes, indicating that real-time accounting is disabled. The interval ranges from 0 to 32767 minutes.

Displaying and

Debugging AAA and

RADIUS

Use the debugging and display commands in all modes.

Table 617 Display and debug AAA and RADIUS

Operation	Command
Display status of dial-in users	display aaa user
View local user database	display user
Enable RADIUS event debugging	debugging radius	event
Enable RADIUS packet debugging	debugging radius	packet
Enable RADIUS primitive language	debugging radius	primitive
debugging

AAA and RADIUS	This section provides examples of using AAA and Radius within a network, with a
Configuration	suggested procedure for each configuration
Examples
Accessing User	The RADIUS server is used for authentication. 129.7.66.66 acts as the first
Authentication Case 1	authentication and accounting server, and 129.7.66.67 as the second
	authentication and accounting server, both using default authentication port
	number 1812 and default accounting port number 1813.