3Com 10014299 manual Router a Configuration, Router B Configuration, DLSw Configuration

Typical DLSw Configuration Example 397

II. Networking Diagram

Figure 139 Networking diagram of DLSw configuration of LAN-LAN

10.120.25.1 10.120.5.2

WAN(IP)

Router A

Ethernet

IBM AS/400

Router B

LLC2LLC2

Ethernet

PC(SNA)

III.Configuration Procedure

1 Router A Configuration:

[Router] dlsw local 10.120.25.1

[Router] dlsw remote 10.120.5.2

[Router] dlsw bridge-set 5

[Router] interface ethernet 0

[Router-Ethernet0] bridge-set 5

2Router B Configuration:

	[Router] dlsw local 10.120.5.2
	[Router] dlsw remote 10.120.25.1
	[Router] dlsw bridge-set 7
	[Router] interface ethernet 0
	[Router-Ethernet0] bridge-set 7
	Thus, the two LANs across WAN are connected together. Note that we don't list
	the related IP commands here, but you have to make sure that IPs of the
	configured local-peer and remote-peer can be intercommunicated each other. The
	notes apply for the following sections.
DLSw Configuration of	I. Networking Requirement
SDLC-SDLC	The two SDLCs across WAN are connected together by using SDLC-SDLC working
	mode.