3Com 10014299 manual Commands to display information of the whole system

6 DISPLAY AND DEBUGGING TOOLS

This chapter includes information on the following topics:

■Display Command Set

■Debugging Command Set

■Test Tool of Network Connection

■Log Function

Display Command Set With display commands, the system status and system information can be viewed. display commands can be divided as follows according to the functionality:

■The command to display system configuration information

■The command to display system running status

■The command to display system statistic information

The following commands can be used to display related information of the whole system in all views. Please see related chapters in this manual for specific display commands.

Table 64 Commands to display information of the whole system

Operation	Command
Display current terminal user.	display client
Display the system clock	display clock
Display the current memory type	display configfile
Display states of various debugging switches	display debugging
Display the history record of input command	display history-command
Display the router name	display systname
Display current configuration information of the	display
system	current-configuration
Display initial configuration information of the system	display saved-configuration
stored in router Flash
Display primary system configuration information	display tech-support [ page
	]
Display registered terminal user	display user
Display version information of system	display version

Debugging Command The command line interface of the 3Com Router 1.x provides abundant

Setdebugging commands, almost corresponding to all the protocols supported by the router, helping the user to diagnose and eliminate network faults.