Configuration File Management 47

After the display version command is used, the information on the slot displays:

card name Driver need to be updated

On-line upgrading uses the upgrading program of other cards and this card will not be upgraded on-line. The Console displays the following prompt information:

%Error: File ID error!

If the on-line upgrading file is damaged, the card cannot be upgraded on-line. The Console displays the following prompt information:

%Error: File CRC error!

If another user on the same card is using the on-line upgrading command input, this user cannot execute the command. The Console displays the following prompt information:

The indicated board is at updating status

Configuration File Management

Content and Format of the Configuration File

Download

Configuration File

This section contains information on configuration file management.

The configuration file is a text file, with the following format:

Saved in command format.

To save space, only the parameters are saved but the defaults are not saved (Please refer to the following chapters for the default values of configuration parameters.).

Commands are organized by views. Commands in the same view are organized together, forming a section, and sections are separated with a blank line or a comment line (beginning with “!”).

Sections are usually arranged in the following order: global configuration, physical interface configuration, logical interface configuration, route protocol configuration, etc.

Ended with “return”.

You can edit the configuration files offline following the specified format and then load them onto the router. Three methods are available for loading configuration files, which are:

XModem approach

TFTP approach

FTP approach

XModem Approach

With this approach, configuration files can be loaded using the download config command in the terminal emulation program after booting the router. This command can only be executed in the terminal emulation program. If executing the command in Telnet, the following prompt will be displayed:

Download can only be executed by the serial terminal client.

Perform the following command in system view.

Page 51
Image 51
3Com 10014299 Configuration File Management, Download Configuration File, Perform the following command in system view