3Com 10014299 manual Displaying and debugging the priority queue, Configuring custom-list queuing

Configuring Congestion Management 689

Configuring Custom Queuing (CQ)

Configure the queue length of the	qos pql pql-indexqueue { top
priority-list queuing	middle normal bottom }
	queue-length queue-length
Recover the default value of the priority	undo qos pql pql-indexqueue { top
queue length	middle normal bottom }
	queue-length

queue-lengthis the queues lengths of the 4 priority levels. They range 1 to 1024 packets.

The default length of each priority queue is shown in the following table:

Table 727 Default Length Value of the Priority Queue

Queue	Length
top	20
middle	40
normal	60
bottom	80

Displaying and debugging the priority queue

Table 728 Display and Debug the Priority Queue

Operation	Command
Display the priority queue configuration	display qos pql [ interface type
conditions and statistic information of the	number ]
interface
Display the content of the priority list	display qos pql

Custom queuing configuration includes:

■Configuring custom-list queuing

■Applying the custom-list queuing group to the interface

■Configuring the queue length of the custom-list queuing

■Configuring the number of the continuously transmitted bytes of the custom queue

■Displaying and debugging the custom-list queue

Configuring custom-list queuing

Custom queuing includes up to 16 groups (the value range of cql-indexis 1 to 16), each of which specifies which types of data packets are input to each queue, the lengths of various queues, and the number of bytes that can be continuously transmitted by polling every queue. Every time the packets are transmitted, the packets in queues 1 to 16 are transmitted sequentially, and the number of the transmitted bytes for every transmission is not less than the number of the specified bytes in this queue, until this queue is empty.

Multiple custom queues can be configured, and the data packet will be matched by the system according to the specified sequence order in the policy list. If it is found that the data packet is matched with a policy, the entire searching process comes to an end.

The custom queue may be configured according to the following methods: