3Com 10014299 manual Configure the IP address of Serial0 interface of LNS

L2TP Configuration Examples 619

dConfigure the IP address of Serial0 interface of LNS.

[Router-LNS]interface serial 0

[Router-LNS-Serial0]ip address 192.167.0.1 255.255.255.0

eConfigure the Virtual-Template-related information.

[Router-LNS]interface virtual-template 1 [Router-LNS-Virtual-Template1]ip address 192.168.0.1 255.255.255.0

[Router-LNS-Virtual-Template1] ppp authentication-mode chap

[Router-LNS-Virtual-Template1] remote address pool 1

fEnable L2TP service and configure a L2TP group.

[Router-LNS] l2tp enable

[Router-LNS] l2tp-group 1

[Router-LNS-l2tp1] tunnel name lns-end

[Router-LNS-l2tp1]allow l2tp virtual-template 1 remote lac-end

gEnable tunnel authentication and configure a tunnel authentication password.

[Router-LNS-l2tp1]tunnel authentication

[Router-LNS-l2tp1]tunnel password simple 3Com router

3Configuration at the user side

■Open [Start/Program/Accessories/Communication/Network Connection Wizard] on the PC installed with Windows2000 operation system. Double click [New Connection] and choose “Dial-up to the Internet”.

Figure 184 Network Connection Wizard

■Click <Next> and choose “I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)” in the popup dialog box, as shown in the following figure.