3Com 10014299 manual Enter the view of logic channel, Channel

Standby Center Configuration Examples 651

Multiple Standby Take both interfaces Serial 1 and Serial 2 as the standby interface of interface Interfaces Serial 0, and use interface Serial 1 as a preference.

1Enter the view of Serial 0.

[Router] interface serial 0

2Set interfaces Serial 1 and Serial 2 as the standby interfaces, their priorities being 30 and 20, respectively.

[Router-Serial0]standby interface serial 1 30

[Router-Serial0]standby interface serial 2 20

Logical Channel Standby In this example, set interface Serial 1 as the standby interface for an X.25 virtual Interface circuit on interface Serial 0.

1Configure interface Serial 0 so that it encapsulates X.25 and specify its IP address and X.121 address.

[Router]interface serial 0

[Router-Serial0]link-protocol x25

[Router-Serial0]ip address 1.1.1.2 255.0.0.0

[Router-Serial0]x25 x121-address 1

2Match an X.25 virtual circuit on interface Serial 0 with logic channel 10.

[Router-Serial0]x25 map ip 2.2.2.3 x121-address 2 logic-channel 10

3Enter the view of logic channel 10.

[Router-Serial0]logic-channel 10

4Specify interface Serial 1 as the standby interface of this logic channel.

[Router-logic-channel10]standby interface serial 1

5Set the time interval as 10 seconds for judging the logic channel as up.

[Router-logic-channel10]standbystate-up 10

Multiple Standby Take both logic channel 3 on interface Serial 1 and interface Serial 2 as the Interfaces with a Logic standby interfaces of logic channel 5 on interface Serial 0.

Channel

1Configure that interface Serial 0 encapsulates X.25 and specify its IP address and X.121 address.

[Router]interface serial 0

[Router-Serial0]link-protocol x25

[Router-Serial0]ip address 1.1.1.2 255.0.0.0

[Router-Serial0]x25 x121-address 1

2Match an X.25 virtual circuit on interface Serial 0 with logic channel 5.

[Router-Serial0]x25 map ip 2.2.2.3 x121-address 2 logic-channel 5

3Configure that interface Serial 1 encapsulates X.25 and specify its IP address and X.121 address.

[Router-Serial0]interface serial 1

[Router-Serial1]link-protocol x25

[Router-Serial1]ip address 3.3.3.4 255.0.0.0

[Router-Serial1]x25 x121-address 3

4Match logic channel 3 with an X.25 virtual circuit on interface Serial 1.

[Router-Serial1]x25 map ip 4.4.4.5 x121-address 4 logic-channel 3