3Com 10014299 Configuration Examples Dumb Terminal Service, Configure Dumb Terminal, Command

		Dumb Terminal Service 61
	Configure the synchronous/asynchronous serial work in	physical-mode async
	asynchronous mode
	Configure the serial interface of the router to be in flow	async mode flow
	mode
	Forbid modem to dial in or dial out	undo modem
By default, no dumb terminal service is configured.
2 Configure auto-execute command command

Configuration Examples

of Dumb Terminal

Service

If the auto-execute command command is configured on the asynchronous serial interface, when you press Enter twice on the external terminal connected to the interface or log onto the router in modem dial-up mode and press Enter twice, the router will automatically execute the operation preset by the auto-execute command command.

If the router is configured with the auto-execute command command, you will not be allowed to log into the configuration interface of the router. If the command cannot be executed, you will return to the interface with the prompt Press ENTER to get started, and after you press Enter, the command will be executed.

Please perform the following configurations in asynchronous serial interface view.

Table 44 Configure auto-execute command command

Operation	Command
Configure the auto-execute command	auto-execute command command
command on the asynchronous serial interface
Remove this command	undo auto-execute command
	command

By default, the auto-execute command command is not configured.

Configure Dumb Terminal

■The configuration procedure of the dumb terminal on sync/async serial 0 ports is as follows:

[Router-Serial0]physical-mode async

[Router-Serial0] undo modem

[Router-Serial0] async mode flow

■The configuration procedure of the dumb terminal on 8/16 async serial 0 port is as follows:

[Router-Async0] undo modem

[Router-Async0] async mode flow

■The configuration procedure of the dumb terminal on AUX port is as follows:

[Router-Aux0] undo modem

After the above operation, Press ENTER to get started displays on the terminal connected to this async interface, press Enter twice to enter the router configuration interface. During the configuration, you can click logout to exit the command line interface and can also click Enter twice to return.

Configure Auto-execute command

The user can use the Telnet command specified by the auto-executecommand to log on the remote SCO UNIX workstation after establishing the connection with the Router via the dumb terminal.