3Com 10014299 manual Perform the following commands in all views, Display and debug Snmp, Name

	SNMP Overview 79
Set the address of host receiving	snmp-agent target-host trap address
the traps	host-addr[ port port ] [ parameters {
	v1 v2c v3 { authentication
	noauthentication privacy } } ]
	securityname name
Remove the address of host	undo snmp-agent target-host trap address
receiving the traps	host-addr[ port port ] securityname
	name
Set the message queue length of	snmp-agent trap queue-size length
traps destined to a host
Restore the default message queue	undo snmp-agent trap queue-size
length
Set the timeout time for traps	snmp-agent trap life timeout
Restore the default timeout time for	undo snmp-agent trap life
traps

By default, the router is disabled to send traps.

5Configure the maximum size of SNMP packets that the router can send/receive

Set the Max SNMP messages that can be received/sent by the agent according to the network loading capacity.

Perform the following configurations in system view.

Table 61 Configure the maximum size of SNMP packets that the agent can send/receive

Operation	Command
Set the maximum size of SNMP packets that the	snmp-agent packet max-size
agent can receive/send	byte-count
Restore the default maximum size of SNMP	undo snmp-agent packet max-size
packets

Display and Debug

SNMP

Perform the following commands in all views.

Table 62 Display and debug SNMP

Operation	Command
Display the statistics of SNMP packets	display snmp-agent statistics
Display the current equipment engine ID	display snmp-agent
	local-engineid
Display information of system location	display snmp-agent sys-info
	location
Display system contact information	display snmp-agent sys-info
	contact
Display information of snmp groups on the	display snmp-agent group
router
Display information of all SNMP users in the	display snmp-agent usm-user
group user name list
Display the group names that have been	display snmp-agent community
configured
Display information of the MIB views that have	display snmp-agent mib-view
been configured
Enable SNMP debugging	debugging snmp-agent { headers
	packets process trap all }