3Com 10014299 manual Upgrade the 3Com, Router Main Program, Software, Main Program software

34CHAPTER 3: SYSTEM MANAGEMENT

Figure 16 “Send file” message window

8After downloading, the router will save the file into Flash or NVRAM, display the following information, and prompt restoring of the baud-rate setting of the terminal emulator.

Download completed.

Writing to flash memory...

Please waiting, it needs a long time ##############

Write Bootrom Success.

Please return to 9600 bps. Press ENTER key to reboot the system.

The above information indicates that the information is downloaded. Boldface characters prompt the user to restore the baud rate setting of the terminal emulator. Click [Disconnect] in the terminal menu, and then click [Connect] once again. If the download fails, the system displays the following information, and reboot the router:

Download failed.

3Com Router start booting

……

If this message is displayed, you should find out the cause prior to upgrading.

9Restore baud rate of the terminal emulator. Press Enter and the Boot ROM software of the router will be directly decompressed and loaded into the memory for execution.

Upgrade the 3Com	This section contains information to assist you with upgrading the 3Com Router
Router Main Program	Main Program software.
Software	CAUTION: You are recommended to upgrade the software only when necessary
	and under the guidance of technical support personnel. The router software
	package includes the Boot ROM software and the 3Com Router main program
	software. When upgrading the software, remember to match the version of the
	Boot ROM software with that of the main software.