3Com 10014299 manual Ping supporting IP protocol, System displays, Ping supporting IPX protocol

	Test Tool of Network Connection 87
ping supporting IP protocol	ping [ip] [-Rdnqrv] [-c count] [-p pattern]
	[-s packetsize] [-t timeout] { host
	ip-address }
ping supporting IPX	ping [ipx] [-n] [-v] N.H.H.H [count [,timeout
protocol	[,packetsize]]]

Please see relevant chapters in the 3Com Router Command Reference Guide for detailed meanings of various options and parameters.

Ping supporting IP protocol

■For each ping message sent, if the response message has not been received when the waiting time crosses the threshold, then Request time out is output.

■Otherwise, the data byte number, message sequence number, TTL, and response time in the response message will be displayed.

■Finally, the statistic information will be output, including the sent message number, received response message number, percentage of messages unresponded, and the minimum, maximum, and average values of the response time.

Examples:

[Router]ping 202.38.160.244

The system displays:

ping 202.38.160.244 : 56 data bytes, press CTRL_C to break

Reply from 202.38.160.244 : bytes=56 sequence=1 ttl=255 time = 1ms

Reply from 202.38.160.244 : bytes=56 sequence=2 ttl=255 time = 2ms

Reply from 202.38.160.244 : bytes=56 sequence=3 ttl=255 time = 1ms

Reply from 202.38.160.244 : bytes=56 sequence=4 ttl=255 time = 3ms

Reply from 202.38.160.244 : bytes=56 sequence=5 ttl=255 time = 2ms --202.38.160.244 ping statistics--

5 packets transmitted

5 packets received

0% packet loss

round-trip min/avg/max = 1/2/3 ms

Ping supporting IPX protocol

■For each Ping message sent, the response information is output. “!” indicates the response message is received, while “.” indicates not received.

■Finally, the statistic information is output, including sent message number, received response message number, percentage of messages unresponded, and the minimum, maximum, and average values of the response time.

Examples:

[Router]ping ipx 2.0.0c91.f61f

The system displays:

Press CTRL_C to break

Sending 5, 100-byte IPX Echoes to 2.0.0c91.f61f, timeout is 2

seconds