3Com 10014299 manual Configure the Custom-Lst Queuing According to the Interface, Queue-number

690CHAPTER 49: CONGESTION MANAGEMENT

Configure the custom queue according to the network layer protocol

The data packets can be classified according to different protocol types, and be input to different custom queues.

Perform the following configurations in the system view.

Table 729 Configure the Custom Queue According to the Network Layer Protocol

Operation	Command
Configure the custom queue according to	qos cql cql-indexprotocol
the network layer protocol	protocol-name queue-option queue
	queue-number
Delete the classification policy in the	undo qos cql cql-indexprotocol
custom queue	protocol-name queue-option queue
	queue-number

Among them, cql-indexis the group number of the custom queue; queue-numberis the queue number with the value ranging 0 to 16. protocol-namemay be ip, and the value range of queue-optionis the same as that of the priority queue.

Configure custom-list queuing according to the interface The data packets can be classified according to different types of the router interfaces into which the data packets are inputted, and be inputted into different custom queues.

Perform the following configurations in the system view.

Table 730 Configure the Custom-Lst Queuing According to the Interface

Operation	Command
Configure the custom-list queuing	qos cql cql-indexinbound-interface
according to the interface	interface-type interface-number
	queue queue-number
Delete the policy in the custom queue	undo qos cql cql-index
	inbound-interface interface-type
	interface-number

Configure the default custom-list queuing The data packets that are not matched with any policy in the custom queue will be allocated to the default custom queue.

Perform the following configurations in the system view.

Table 731 Configure the Default Custom-List Queuing

Operation	Command
Configure the default custom-list queuing	qos cql pql-indexdefault-queue
	queue-number
Recover the default queue number of the	undo qos cql pql-indexdefault-queue
custom-list queue

Multiple policies can be defined for the group of the custom-list queues, which is then applied to an interface. When the data packet arrives at the interface, the data packet is matched by the system according to the configured policy, and the data packet is input to the specified custom queue if it matches with the policy. If the data packet does not match with any policy, it is input to the default queue. If the default custom-list queue is not configured, the priority level is normal.