3Com 10014299 manual Configure Serial0 master/slave addresses, Apply the CQ queue 1 to Serial0

Congestion Management Configuration Examples 695

[RouterB-acl-105]rule normal permit ip source 10.1.5.0 0.0.0.255 destination 10.1.4.0 0.0.0.255

[RouterB-acl-105]rule normal deny ip source any destination any

[RouterB-acl-105]acl 107

[RouterB-acl-107]rule normal permit ip source 192.168.0.1 0.0.0.0 destination 192.168.0.2 0.0.0.0

[RouterB-acl-107]acl 108

[RouterB-acl-107]rule normal permit ip source 192.168.1.1 0.0.0.0 destination 192.168.1.2 0.0.0.0

bConfigure the CQ queue

[RouterB] qos cql 1 queue 1 queue-length 100

[RouterB] qos cql 1 queue 1 serving 5000

[RouterB] qos cql 1 queue 2 queue-length 100

[RouterB] qos cql 1 queue 2 serving 1000

[RouterB] qos cql 1 protocol ip acl 107 queue 1

[RouterB] qos cql 1 protocol ip acl 108 queue 2

(CQ restricts the traffic in Tunnel0 that is larger than that in tunnel1, and CQ is effective at the exit)

cConfigure Serial0 master/slave addresses

[RouterB-Serial0]ip address 192.168.0.2 255.255.255.252

[RouterB-Serial0]ip address 192.168.1.2 255.255.255.252 sub

dApply the CQ queue 1 to Serial0

[RouterB-Serial0] qos cq cql 1

eConfigure Tunnel0

[RouterB-Tunnel0]ip address 10.1.2.1 255.255.255.0

[RouterB-Tunnel0] source 192.168.0.2

[RouterB-Tunnel0]destination 192.168.0.1

fConfigure Tunnel1

[RouterB-Tunnel1]ip address 10.1.7.2 255.255.255.0

[RouterB-Tunnel1] source 192.168.1.2

[RouterB-Tunnel1]destination 192.168.1.1

WFQ Configuration

Example

1Configure a WFQ queue with congestion discard threshold as 64 packets and 512 dynamic queues.

[Router] interface ethernet 0

[Router-Ethernet0]qos wfq queue-length 64 queue-number 512