Displaying and Debugging RIP 421

 

 

Operation

Command

 

 

Change or cancel filtering the routing

undo filter-policy gateway

information received from a specified

prefix-list-name import

gateway

 

 

 

Filter the routing information received

filter-policy {acl-number ip-prefix

 

prefix-list-name } import

 

 

Change or cancel filtering routing

undo filter-policy {acl-number

information received

ip-prefixprefix-list-name } import

 

 

Filter routing information received from a

filter-policy ip-prefix

specified gateway and the routing

prefix-list-name gateway

information received according to

prefix-list-name import

prefix-list

 

 

 

Change or cancel filtering the routing

undo filter-policy ip-prifix

information received from a specified

prefix-list-name gateway

gateway and the routing information

prefix-list-name import

received according to prefix-list

 

 

 

Configure filtering the routing information being advertised

Table 484 Filter the Routing Information Being Advertised by RIP

Operation

Command

 

 

Filter the routing information being

filter-policy { acl-number

advertised.

ip-prefix prefix-list-name} export [

 

protocol ]

 

 

Change or cancel filtering the routing

undo filter-policy { acl-number

information being advertised

ip-prefix prefix-list-name} export [

 

protocol ]

 

 

By default, RIP does not filter any route information received or being advertised.

The protocol attribute specifies the routing domain that can be filtered. At present, RIP can filter routes domain such as Connected, Static, OSPF, OSPF-ASE and BGP. See “Configure Route Filter” of “Configuration of IP Routing Policy” for details.

Resetting RIP This command restores the router to the default RIP configuration.

Perform the following configuration in RIP view.

Table 485

Reset RIP

 

 

 

Operation

 

Command

 

 

 

Reset RIP

 

reset

 

 

 

Displaying and Debugging RIP

Table 486 Display and Debug RIP

Operation

Command

 

 

Display current RIP running status and

display rip

global configuration information.

 

 

 

Turn on RIP debugging information

debugging rip { packets receive

 

send }

 

 

Page 425
Image 425
3Com 10014299 manual Displaying and Debugging RIP, Filter the Routing Information Being Advertised by RIP, Reset RIP